Altigen ACM 6.5 Guia do Utilizador descarregar pdf (Página 157)

Triton Analog Trunk GS/LS Properties

MAXCS ACM 6.5 Administration Manual 143

Figure 13. Setting trunk In Call Routing to an AA

5. Call from one trunk to the testing reference trunk. You should hear a 1kHz tone

playing at the originating side.

6. While the tone is playing, measure the Rx Level at the trunk that is making the

outgoing call.

If the reading is less than -6 dB, for example -3 dB, take the following steps to

attenuate the gain for the Triton Analog Trunk to IP phone connection:

a. Go to VoIP Board configuration and click the Advance button.

b. Set the Transmitting gain to IP Extension to 3 for the Triton Analog Trunk. (Do

NOT change the gain in the trunk property of the Triton Analog Trunk Board,

since it may impact the echo canceller performance. If the reading is -6 dB to -

14 dB, for example, -12dB, no change is needed.

If the reading is -15 dB to -18dB, take the following steps to increase the gain for

the Triton Analog Trunk to IP phone connection:

a. Go to VoIP Board configuration and click the Advance button.

b. Set the Transmitting gain to IP Extension to 9 for the Triton Analog Trunk. (Do

NOT change the gain in the trunk property of the Triton Analog Trunk Board,

since it may impact the echo canceller performance.)

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 501 502

Comentários a estes Manuais

Sem comentários

Click on an alphabet below to scroll to the full list of models starting with that letter

All
s

Models	Document Type
S041220	Datasheet Epson Presentation Matte Paper - 44" x 82', 2 pages
S041228	Datasheet Epson Semigloss Paper Heavyweight - A1 - 24" x 82', 2 pages
S045039	Datasheet Epson Exhibition Fiber Paper 13" x 19", 1 pages