Altigen ACM 6.5 Guia do Utilizador descarregar pdf (Página 395)

100

101

Configuration Procedures

MAXCS ACM 6.5 Administration Manual 381

5. At the secondary system, install MAXCS 6.5 software. The virtual board types

(H323SP, SIPSP, and/or HMCP), must mirror the virtual board types installed on the

primary system.

6. Set up the Dataprobe K-AB system. Make sure the IP address of the primary,

secondary and K-AB system are static.

Configuration Procedures

Configure the primary and secondary servers, as follows.

At the Primary Server

1. Install the Redundancy license.

2. Configure primary system boards, and reboot if necessary.

3. Set configurations to the primary system, such as extensions, trunks, VoIP dialing

tables, and so on.

4. Select System > Redundancy to open the Redundancy dialog box.

Figure 2. Redundancy dialog box

a. Select Primary as the system role.

b. Check the Enable Redundancy check box.

c. Enter IP addresses for the primary and secondary servers and the AB-Switch.

d. Enter a redundancy key (your password for redundancy; it needs to be the same

for primary and secondary systems).

e. Enter the shared Softswitch IP address.

5. Click OK or Apply when finished.

At the Secondary Server

1. Power on the secondary system.

2. Install the Redundancy license.

1 2 ... 390 391 392 393 394 395 396 397 398 399 400 ... 501 502

Comentários a estes Manuais

Sem comentários

Altigen ACM 6.5 Guia do Utilizador Página 395

Comentários a estes Manuais

Manuais e produtos relacionados com Software Altigen ACM 6.5